(Nagios)-check_hpasm[HP]

2018-02-12 18:54:13来源:cnblogs.com作者:请点..头像人点击

分享
Nagios Check_hp HP2014年11月18日下午 08:49 https://IP:2381    [[email protected] ~]# tar zxvf check_hp_bladechassis-1.0.1.tar.gz  [[email protected] check_hp_bladechassis-1.0.1]# ./check_hp_bladechassis -H xxx.xxx.xxx.xxx  SNMP ERROR: Can't determine model name  [[email protected] check_hp_bladechassis-1.0.1]# snmpwalk -Os -c public -v 1 xxx.xxx.xxx  [[email protected] libexec]# ./check_hpasm -H xxx.xxx.xxx -C public  CRITICAL - snmpwalk returns no product name (cpqsinfo-mib), wrong device在windows端安装ilo驱动 (必须),先安装SNMP再Agent(cp024529_log_th.exe  cp024617_ilo_th.exe  cp022559_hp_agents_w2008.exe)  [[email protected] libexec]# ./check_hpasm -H xxx.xxx.xxx  OK - System: 'proliant dl380p gen8', S/N: '*******', ROM: 'P70 03/01/2013', hardware working fine, da: 2 logical drives, 16 physical drivesRedhat系统下安装agent  [[email protected] ~]# rpm -ivh hpacucli-9.40-12.0.x86_64.rpm(不必须)  rpm -ivh hp-health-9.50-1631.33.rhel5.x86_64.rpm(必须)  rpm -ivh hp-snmp-agents-9.50-2564.34.rhel5.x86_64.rpm(必须)  /etc/init.d/hp-snmp-agents start  需要配置snmp  /sbin/hpsnmpconfig  /etc/init.d/hp-health restart  /etc/init.d/hp-asrd restart  /etc/init.d/hp-snmp-agents restart其他Server访问不了  [[email protected] libexec]# ./check_hpasm -H xxx.xxx.xxx  CRITICAL - snmpwalk returns no product name (cpqsinfo-mib), wrong device但本地能检查出数据,所以是snmp配置有误。  [[email protected] plugins-scripts]# ./check_hpasm  OK - System: 'proliant dl380p gen8', S/N: '*******', ROM: 'P70 03/01/2013', hardware working fineLinux下配置snmp(可从其他机台copy过来)  [[email protected] plugins-scripts]# vim /etc/snmp/snmpd.conf  #add (网上参考) <http://javatechnology.iteye.com/blog/768001>  #       sec.name  source          community  com2sec notConfigUser  [監控主機]      public   .1表示所有设备信息  view    systemview    included   .1  修改process checks(去掉注释)  # proc mountd  # proc ntalkd 4  # proc sendmail 10 1  修改Executables/scripts配置(去掉注释)  #exec echotest /bin/echo hello world  修改disk checks配置(去掉注释)  #disk / 10000  修改load average checks配置(去掉注释)  #load 12 14 14  [[email protected] plugins-scripts]# service snmpd restart  其他Server获取信息ok  [[email protected] libexec]# ./check_hpasm -H xxx.xxx.xxx  OK - System: 'proliant dl380p gen8', S/N: '*******', ROM: 'P70 03/01/2013', hardware working fine, da: 1 logical drives, 14 physical drives   注意:proliant dl380 gen9  rpm -ivh hp-health-10.10-1710.30.rhel6.x86_64.rpm  rpm -ihv hp-snmp-agents-10.10-2732.25.rhel6.x86_64.rpm cp029394_ilo_Interface.exe cp029429_ilo_Management.exe  cp030048_Agent.exe    http://www.hpiss.com/7740.html      

最新文章

123

最新摄影

微信扫一扫

第七城市微信公众平台